When your computer screen suddenly turns blue while you’re working on something essential, it’s not nice. The gadget then displays an error message stating that the Clock Watchdog Timeout has expired. This is known as the “Blue Screen of Death,” or BSOD for short.
The device immediately shuts down and restarts after receiving the alert. A corrupted file could result in the loss of key papers you were working on at the time of the incident. Such a problem necessitates a complete reboot, which adds to the problem.
Fortunately, there are a number of workarounds for this catastrophic issue. It is the goal of this essay to provide a comprehensive analysis of the factors contributing to this issue, as well as potential solutions.
What is The CLOCK WATCHDOG TIMEOUT Function Called?
An issue on your computer might cause the Blue Screen of Death, or BSOD, to display on your computer’s screen. An entire reboot is required in order to get the computer to work again after receiving this notice.
A message appears before the computer restarts itself when it cannot handle the error. The true issue is when BSOD occurs frequently, making it impossible to operate on your computer.
Read Also:
If the issue happens while you are working on some critical files, you risk losing them when the machine restarts. Because BSODs seem to appear out of nowhere, the user is unprepared when issue arises. As a result, the user is left befuddled and his important data has been permanently gone.
BSOD can occur for a variety of reasons and requires a thorough investigation to determine the cause. Overheating, overloading or overclocking, damaged RAM or hard disc, and incompatible drivers are all possible culprits.
It can also be caused by a malware assault or registry modifications. It’s possible that the problem stems from an incorrect shutdown of the system, such as a violent shutdown.
To fix or replace the hardware that is causing the issue, you must first identify the problem. Detection of the dump files is required here. When a problem arises because of bad software, you need to fix, eliminate, or upgrade it.
In Windows 10, how to fix the timeout of the clock watchdog
The problem may appear insurmountable, but there are several ways to fix it. Here are a few tried-and-true solutions to the Clock Watchdog Timeout issue:
1. Do Not Increase Your CPU’s Speed
The first thing you need to know is that this BSOD is usually triggered by a malfunctioning processor. As a result, you should consider running a CPU overclock test. To put it another way, overclocking implies increasing the speed and frequency of your processor. Processors, on the whole, have a predetermined speed range.
It’s possible to get a fun speed boost by pushing this grade further, but the procedure is quite dangerous. There is a danger in doing so, though, as overheating might cause the system to catch fire. It can permanently harm your computer and void your warranty.
When it comes to bringing your processor’s speed and frequency back to normal, the programme you used to overclock it is most important. Overclocking a processor is possible with a variety of software, including that provided by Intel and AMD. In order to see if the BSOD reappears, cease overclocking the device.
2. External Devices
External devices such a keyboard, mouse, printer, or webcam that are incorrectly setup can cause instability in the system. It’s the most typical source of BSOD issues. The issue occurs commonly if the external devices are damaged. However, this can be remedied by taking these steps:
Step 1: Open the Start menu and type “Device Manager” into the Search box to get started. Next, open the Device Manager and select View from the drop-down menu. Next, enable the “Show hidden devices” permission.
Find devices with error warnings next to their names in the Device Manager.
Step 2: Expand the menu by clicking on the arrow next to their name. Error message “Unknown USB Device” appears in nearly all hardware-induced BSODs, and it is usually triggered by faulty USB controllers (Device Descriptor Request Failed). Turn off your computer and remove each USB device one at a time, one at a time, one at a time.
Step 3: During this step, the error message that was previously displayed will vanish. If the issue persists, reconnect all the devices and turn off the “Show hidden devices” option. To see if the Unknown USB Device is displayed, check the status of the device. Remove devices one at a time until the error vanishes.
This will help you identify which hardware is causing the problem. Next, discover the problematic hardware in the USB controller by unplugging and examining it. Then, select Uninstall from the context menu. Lastly, restart your computer to verify if the Clock Watchdog Timeout problem has been resolved.
3. Switching to External Speakers
For those who have both internal and external speakers, switching between them is likely to cause problems.
It’s possible that issues will emerge throughout the process of switching speakers, but this is easily remedied. Internal speakers may not be used after detaching the other pair. This problem can be solved by following these steps:
Step 1: Start by right-clicking on Volume in the taskbar. Then, click on the Playback devices tab. Keep the Playback tab open in order to access the sound settings in step two. Disable the speakers by right-clicking on them and selecting Disable.
Step 2: Make sure the other speaker is working before continuing. If you don’t, you won’t be able to play any audio because you’ll be using only one speaker instead of both.
Check to check whether the Clock Watchdog Timeout problem persists after a system restart.
4. Upgrade Your Computer’s BIOS
Basic Input Output System, or BIOS, is the startup programme used by microprocessors. The first programme the system loads is this embedded software on the motherboard. As a result, all connected devices, including a mouse, keyboard, and CD drive, can be used immediately.
If your BIOS settings are unstable, your computer’s performance will be compromised. For such occasions, you have to try updating BIOS, which can help you deal with most of the issues related to it and make the system function better. Follow these steps to upgrade your BIOS:
Step 1: There are a few things you need to know before you begin this process. In order to find this information, open the Start menu and type msinfo into the Search box. Take note of the BIOS revision number located directly below your processor’s model number.
Step 2: You have to know whether your system was pre-built or gathered manually by combining individual components. It’s important to know this information since if your BIOS is designed for a single component, it won’t work with any other devices. If you use the improper BIOS to rebuild the BIOS, it can cause a host of other problems.
Step 3: Make sure your PC is updated and ready to go. Ensure that your laptop’s battery is fully charged before plugging it into a power source. In order to prevent the system from shutting down in the middle of the procedure, a UPS should be used if it’s a computer. Make sure the battery isn’t running low when you’re updating.
Step 4: Various desktop manufacturers have different instructions for installing BIOS. You need to go to the manufacturer’s website and upgrade your system. To begin the BIOS update, you must first input your model number and then select the appropriate option.
5. Make Sure Your CPU isn’t Faulty
The Central Processing Unit must be repaired or replaced if it continually displaying errors. The entire system can be harmed by a CPU malfunction. To ensure that your computer runs smoothly, check to determine if the CPU is in good working order.
If you’re unsure, it’s best to get professional help. Get help from an IT expert who can figure out what’s wrong with the device. Ask for the model that best fits your system if you need a replacement.
6. Provide A Memory Dump Of The Kernel
During a system crash, the Kernel Memory Dump stores all of the kernel’s memory. Compared to the physical memory of the system, it is a mere one-third the size.
A Windows debugger can be used by IT professionals to read the Kernel Memory Dump, which reveals the location of the mistake. To solve this problem, follow the steps outlined below:
Step 1: Start by typing “Command Prompt” into the search box and selecting it with the right mouse button. Then, pick the option to run as administrator.
exe/standard/all appears as the second step. Using the Command Prompt, type the command and then press Enter.
Step 2: This will cause the BSOD and create a Minidump folder on Local disc C, where the log file will be saved.
Step 3: Download the WinDbg SDK from the “Get Debugging Tools for Windows” section of the WinDbg website. If you only want debugging tools, make sure that all other options are unchecked.
Step 4: Download and install the tool called windbg. Once you’ve found the utility, simply execute it. Using the File menu, select Crash Dump and locate the minidump file on the Local disc C.
Look for “Probably caused by” near the bottom of this document, in Step 8. This is a marker that identifies the driver who is most likely responsible for the accident.
Step 5: Click on Uninstall device in Device Manager to remove this driver. In order to save time, you can choose to update your driver by clicking on the Update Driver button in Step.
7. BIOS
Restoring the default settings of your BIOS is a simple option if you have an up-to-date system or lack the confidence to do it yourself. It is best not to risk more damage to your computer by attempting to install the BIOS if you are unsure how to do so.
Step 1: Restart your computer and press F8 to get into the BIOS. You can’t use a mouse in BIOS, thus you need to be conversant with the control keys.
Step 2: Press F9 to reset the system to its default settings, then press enter. Go to the Exit tab and select Load Setup Defaults if this does not work. Then, press the Enter key to proceed. Exit Saving Changes and wait for your system to restart.
A Blue Screen Of Death (BSOD) may show at this point.
8. Uninstalling Virtual Image Managers
Daemon Tools and Alcohol 120 percent can be used to create optical and virtual disc images. Most of these tools have a connection to the BSOD. ‘
If a BSOD problem occurs, it is better to uninstall them or replace the old one with a new one. Following these instructions will help you get rid of virtual image managers.
Step 1: Open Settings from the Start menu. Next, select the Apps tab and look for the programme you want to uninstall in the list there. Uninstall is the next step.
Instructions will be shown on the screen in the third step. To complete the process, follow the steps.
9. Avoid Overheating Your Computer
System failures are frequently caused by overheating. For long periods of time, the PC will likely freeze or shut down due to a weak cooling system.
Step 1: Give the system some breathing room in order to prevent overheating. Get rid of anything in the system that is obstructing air flow.
Step 2: Remove any dust from your computer’s internal fans. Replacement of the CPU’s internal fan is the third step. This is the final step in ensuring that your computer does not overheat.
Install a water cooling kit if the heat is becoming unbearable.
Read Also:
Conclusion
Undoubtedly, when we are engaged in critical work, the Blue Screen of Death is an annoyance. When the system is restarted, you may lose your important files. Clock Watchdog Timeout can occur for a variety of reasons, and there are a plethora of solutions available to fix it.
Even if you don’t have the help of an expert, you may try most of the solutions on your own. Here, I’ve tried to explain each option in depth. I sincerely hope that this was beneficial to you.