DNS_PROBE_FINISHED_NXDOMAIN Google Chrome has a low rate of error. Due to a weak Internet connection or incorrect DNS settings, this problem is most commonly encountered “DNS_PROBE_FINISHED_NXDOMAIN” is a simple error message indicating that “This site cannot be accessed.”

If you’re working on an important project or if you’re just browsing the internet, this mistake can be extremely frustrating. However, there are always answers to any difficulty, and this error is no exception.


DNS_PROBE_FINISHED_NXDOMAIN or DNS_PROBE_FINISHED_NXDOMAIN is the user-friendly error in your Google Chrome that usually happens in conjunction with the most effective remedies.

As a result, problems with the Internet’s DNS system may arise. DNS errors like DNS_PROBE_FINISHED_NXDOMAIN can occur if DNS is unable to locate the IP address.


Chrome is a browser developed by Google.

DNS_PROBE_FINISHED_NXDOMAIN is the error message displayed in the Chrome browser, and the DNS address was not found. There is no way to get to this site. There is a problem accessing this website at this time.

FireFox by Mozilla

The Hmm message appears in Mozilla Firefox. We can’t seem to locate that particular website.’s server is not reachable.It is possible to use Microsoft’s Edge browser on

The mistake Microsoft Edge displays the message I can’t seem to go to this page. Make sure your address is correct.


Similar to Safari’s Can’t Find the Server issue, this message appears in Chrome. can’t be opened because the server “” can’t be found by Safari.

Read Also:

  1. WOW51900319
  2. This Site Can’t Be Reached
  3. Windows Has Stopped This Device Because It Has Reported Problems. (Code 43)


DNS_PROBE_FINISHED_NXDOMAIN is an easy remedy that may be carried out by following the procedures outlined below. Select the steps that are most relevant to your issue.

1. IP Address Renewal 

A client-side DNS problem occurs if you are able to browse webpages elsewhere but not on your computer. In order to avoid this, it is best to release and renew your IP addresses. It will then refresh your new IP address after flushing the local DNS cache.

Regarding Microsoft’s operating system,

Step 1: To begin, open the Run window by pressing Windows key + R.

Step 2: Type cmd into the search box to access the command prompt. In the command prompt, type the following commands and press Enter after each one.

/release ipconfig /

/flushdns ipconfig

/renew ipconfig on the command line

internet protocol set dynamic name server netsh int ip

ssh netsh winsock reset -l

When all the commands have been successfully executed, restart your computer.

For Mac

Step 1: To begin, go to the Apple menu and select System Preferences.

Step 2: If you see a network icon, select it and then click on the advanced button at the bottom. Using the TCP/IP tab, click on the “Renew DHCP” button and follow the onscreen instructions.

Step 3: Go to Utilities and open the MAC terminal to delete the local DNS cache. Open the terminal and type the command below:

command-line tool dscacheutil

Finally, you can restart your computer and get rid of the DNS PROBE FINISHED NXDOMAIN problem.

2. Restarting the DNS Client Service 

It’s possible for Windows users to restart the DNS client service in order to resolve the DNS_PROBE_FINISHED_NXDOMAIN issue. You can resolve and cache DNS domain names by restarting the DNS client service.

As a result of a DNS caching mistake, Google Chrome displays the DNS_PROBE_FINISHED_NXDOMAIN error while trying to access a domain that no longer exists.

Step 1: Press Windows key + R to open the Command Prompt. Type “services.msc” in the search box and press OK. A new Services window will appear. Locate a DNS client and click Restart from the context menu when you find it.

Step 2: The command prompt must be used if the restart option is unavailable or greyed out. In order to open the command prompt, press Windows key + R and type cmd in the search bar.

Step 3: In the search box, type “cmd” and press OK. Type in the following commands and press Enter after each one:

the command “net stop dnscache”
To begin, type net start dnscache in the command line

Step 4: Because you’re checking out multiple versions of Windows, you may get an error message. In order to use this service, you cannot pause, continue, or stop. As a result, you must set up CMD as a network service.

3. Change Your DNS Servers

Your Internet service provider (ISP) is responsible for configuring your DNS servers. You can use the default DNS servers on your network to try to update or change your DNS servers.

Regarding Microsoft’s operating system,

Step 1: Press Windows key + R to open the Command Prompt.

Step 2: In the search box, type “Control Panel” and press OK.

Step 3: Select the Network and Internet option. Open the Network and Sharing Center after that. ‘Simply’. Select “Change adapter settings” on the left side of the panel.

Step 4: Go to your current network, select, and right-click on the one you want to connect to. To access the properties, select it from the drop-down menu. Protocol Version 4 (TCP/IPv4) or Protocol Version 6 (TCP/IPv6) must be selected based on DNS values in Step 6. Then, go to the Properties page.

Step 5: In the eighth step, you have the option of It says “Use these DNS server addresses” and you should click on it. Once you’ve entered the IP address, click OK. and are IPv4 addresses. There are two IPv6 addresses for this, one for 1111 and the other for 1001

Once you’re done with this, you can restart your web browser.

For Mac

Step 1: On your Macbook or iMac, go to System Preferences by clicking on the Apple icon in the upper-left corner.

Step 2: If you see a network icon, select it and then click on the advanced button at the bottom. Once you’ve entered the Cloudflare DNS server addresses, press OK. and are IPv4 addresses. Both 2606:4700:0011:001 and 2606:4700:0011:001 are IPv6 addresses.

Restart your MAC at this point. Now that you’ve opened the page, everything should work as expected.

 4. Resetting Chrome Flags 

Restoring your browser’s default settings may fix the error if it is caused by corrupted settings. Reset Chrome Flag settings to fix this site can’t be reached error. Follow the steps below.

Step 1: The first thing to do is to open Google Chrome on your computer. Second, type chrome:/flags in the address bar of the Chrome browser.

Step 2: Next to the search box, click Reset all to default. Finally, restart your computer. We’re working on resolving DNS_PROBE_FINISHED_NXDOMAIN (site not found) right now.

5. Disabling VPN and Antivirus 

VPNs and anti-virus software can sometimes prevent certain networks or applications from running. ‘ DNS servers may also be included. Your problem can be temporarily resolved by disabling your VPN and antivirus software. It’s as simple as opening the website and logging in.

 6. Check Your Windows Local Hosts File

Step 1: The first step is to open the Start Menu by clicking on it. Locate any text editor installed on your computer. You can use Notepad, Notepad++, Atom, sublime, and so on. Next, right-click on the text editor and select the “Run as administrator” option.

Step 2: Go to File, Open, and select the following location in the text editor.


If your website is listed, you need to remove it from the list. Remove your website if it appears on the list.

For Mac

Step 1: Open Utilities by clicking Go in the upper left corner of your Macbook or iMac. Now is the time to launch the terminal. Using the terminal, enter the following commands and press Enter. command “nano” in private directory of hosts

Please remove your site from the list if you see it.

7. Check Your Domain’s DNS Records

It’s possible that the issue could exist on both the client and server sides. On the domain side, it is possible that there is a problem.

Checking your host file isn’t enough; if the error persists, you need to check your domain’s DNS settings. This can also happen if you encounter a DNS caching error while moving from one domain host to another.

8. Start Your Computer From Scratch

Just give it a shot if none of the other options work for you. It’s a good idea to restart both your computer and router. Restarting your computer is the best way to get rid of all of your computer’s errors and temporary data.

Read Also:

  1. Ntoskrnl.exe
  2. There Was a Problem Resetting Your PC
  3. Ethernet Doesn’t Have a Valid IP Configuration


As a result, we’ve listed the best ways to fix the DNS_PROBE_FINISHED_NXDOMAIN (site can’t be reached) error on Windows and Mac below. If you follow the procedures step-by-step, you’ll be on your way to fixing your problem in no time.

You’ll be able to enjoy your website again if you follow the correct procedure. I hope this information was helpful to you. So, until we meet again, stay tuned!