It’s a rare blue screen of death that occurs when a driver goes into sleep mode during your work session. When Windows tries to wake up a device driver from hibernation, the BSOD frequently appears because the driver is slow to respond or cannot be woken up at all.
The problem can be solved by making simple adjustments to the power settings, but some users may need to go further in order to find a solution. There are six methods for resolving Driver Power State Failure in Windows 10.
Incompatible drivers are the most common cause of a Blue Screen of Death, which is a problem with Driver Power State Failure. To avoid the agony of the Blue Screen of Death, install the best software to fix these problems.
Depending on what caused the problem, you can either restart the computer or use one of the following solutions. It’s natural to be alarmed when they see the Windows Blue Screen of Death. However, there are a few simple steps you can take to resolve the Driver Power State Failure in Windows 10.
When it comes to solving this problem, you can check out the tutorial below for a simple solution. Driver power state failure occurs in 99 percent of the cases when your operating system is put into sleep mode After trying to log in, this error message is likely to appear.
Power settings or driver incompatibilities are to blame for the problem. Users have reported the following issues when their computers experience Driver Power State Failure:
Faulty Driver Power State Stop Code Operating your computer can bring up the dreaded Blue Screen of Death (BSoD). The power state of the driver has failed.
In terms of operating systems, Microsoft’s Windows 10 is the most recent. Many HP, Dell, and Lenovo users have reported this problem, which affects a wide range of products and is applicable to nearly every model.
Read Also:
It’s common for Nvidia graphics cards to be the cause of this problem. Using an Nvidia graphics card, we’ve got some recommendations for you.
Power failure in the driver When using a specific USB device, you may experience this problem. Disconnect all USB devices and look for the one that is causing the problem if that doesn’t work.
Some customers have reported experiencing a problem with their computer’s power state while it’s starting up or booting up. Using your computer becomes impossible if this error occurs during startup.
The power state of the driver has failed. Photoshop and Autocad have both been known to experience this issue, but it’s not uncommon for it to occur in other programmes as well.
Either an SSD or a hard drive’s power status has failed, and you’re left without a working drive (HDD) It’s possible that a new hard drive or SSD is to blame. Make sure your drivers are up to date and everything is working properly if this happens.
The power state of the driver has failed. MCAFEEE and KAVSKYY — Security software, including your antivirus, can be at fault as well as third-party applications in many cases Using Kaspersky or McAfee, this problem is more common, according to the users.
The blue screen of death – 0x0000009f error usually appears on startup as a result of a driver problem. Windows Update KB 2983336 contains a fix for the issue.
The power state of the driver has failed. ntoskrnl.exe For those who get a “Unknown filename” error message, ntoskrnl.exe can be used to find out what file is causing it. This problem is most commonly caused by ntoskrnl.exe, according to users.
Driver Power State Failure in Windows 10: What To Do?
The answers are here.
1. Start Your Computer in Safe Mode
A newer driver may contain problems that cause this problem, even if updating a device driver is the most effective approach. To fix this, you’ll need to go back to the previous working driver.
Safe Mode may be required before you can successfully roll back your drivers.
Step 1: Simply right-click on the Start button and select ‘Device Manager.’
Note – It is important to identify which device drivers are causing the problem and then select them one by one. It’s most likely a new or recently updated gadget. The best way to find out more information is to look through the BSOD dump logs. Right-click the device and select Properties from the menu.
Step 2: You can do this by going to your device’s Properties window and selecting the Roll Back Driver option. After resetting the device, Windows will ask why you’re doing so. By clicking Yes, you can select one of the other options that are acceptable.
Step 3: When the problem driver is removed, Windows will install a new one. In order to prevent this BSOD from happening again, you should turn off your computer’s power-saving mode before restarting. To save power, uncheck the Allow the computer to turn off this device to save power checkbox in the Power Management panel.
Step 4: Click OK to save your changes. Right-click the Start menu and select Shut down or sign out > Restart to re-enable the device driver you just rolled back.
2. Make Sure Your Drivers Are Up-to-Date
A breakdown in the power supply for the driver The most common cause of a BSOD is a problem with the installed device drivers. It’s possible to manually install new drivers if your device doesn’t automatically install updates.
Typically, this is done through Windows Update, which will search for (and install) any necessary drivers for your computer. Use Windows Update to check for any new driver updates that may be available.
Step 1: Choose Download or Download and Install under Update & Security in the Settings menu. Selecting Check for Updates will first look for any missing drivers.
Step 2. Manually download and install the device drivers from the manufacturer’s website, even if they are available through Windows Update. On the NVIDIA site, the NVIDIA graphics drivers are significantly more recent than the ones available through Windows Update.
It’s also possible that you’ll need to download the manufacturer’s chipset drivers for internal motherboard components (such as built-in WiFi) if you’ve built your own computer.
3. Run a SFC Scan
Step 1: Press Windows Key + X to open the Win + X menu, then select Command Prompt (Admin) from the drop-down menu. PowerShell can be used instead of the Command Prompt if it is not available (Admin).
Step 2: It is now time to run the command prompt and type in the command sfc scannow. It’s time to get started with scanning. Don’t interrupt the SFC scan because it can take up to 10 minutes.
In the event that an SFC scan cannot fix the issue, users recommend using a DISM scan. Simply follow these guidelines:
Step 1: Make sure you’re running Command Prompt as an administrator before you do this. The following commands should be typed in:.
DISM.exe /online /cleanup-image /scanhealth
Dirty Image Cleaner (DISM) /Online /Cleanup Image Cleaner (Restore Health)
Step 2: The SFC scan can now be performed if it was previously inaccessible. Problem solved and error message no longer displayed after both scans have been carried out. It’s possible to fix the Driver Power Failure warning by following the instructions provided.
4. Reconfigure Your Electrical Settings
Step 1: Open the Control Panel by pressing Windows Key + S. To access the Control Panel, select it from the drop-down menu. When the Control Panel appears, look for the Power Options option and click on it to access it. It is possible to change the power button’s function by clicking on it.
Step 2: Select Change settings that are no longer accessible from the drop-down menu. Disable The quick start (recommended), sleep, and hibernation options should be disabled. To keep your changes, click the Save button.
Step 3: Check the Power State of the Driver In some cases, Dell devices may fail because of the power settings you’ve made. Some users think that removing specific power settings, such as the ones we’ve shown you, will fix the problem.
5. Modify The Power Plan Settings
Take a look at the Control Panel’s Power Options to get started. Under the currently selected power plan, you can make changes to the plan settings. Then, from the drop-down menu, select Change advanced power settings
Expand the Sleep section and set all the options to Never in Step 2. Navigate to the PCI Express and Wireless Adapter Settings menus on the Windows operating system. Take a look at all of your options and make them all nil.
Read Also:
Conclusion
That should take care of the issue. This feature is supported by a variety of devices on your computer, so you’ll need to disable it for each one. Your power settings may be to blame for the Windows Driver Power State Failure problem. ‘ However, turning off many electronic devices to conserve energy may result in this issue.