How To Fix ‘ERR_CONNECTION_CLOSED’ Error in Google Chrome


In the present day, Google Chrome is one of the most extensively used and dependable browsers available for the Windows operating system. Overall, it’s a great browser, but even the best things have a few kinks. In general, users have very limited power to influence how their browsers work.

Despite the fact that it was created in this way to make the procedure easier for the user, it can also make debugging tough. The “ERR_CONNECTION_CLOSED” error is difficult to deal with because of this.

When an error like this occurs, it can be quite frustrating for the user to try to figure out what went wrong. If you’re lucky, you can spot the issue quite easy, therefore it isn’t impossible to do so. However, this isn’t the case the majority of the time.


Error code “ERR_CONNECTION_CLOSED” basically signifies that the website you are trying to access has been closed. So, the browser’s inability to clearly pinpoint the problem doesn’t help in making the work of correcting it any easier.

Chrome itself may not be the source of the problem in some cases. The cause of the network outage has not been made public. The “ERR CONNECTION CLOSED” conflict can be difficult to fix, so we’ve compiled a list of typical fixes below to make things a little easier for you.

Read Also:

  1. WOW51900319
  2. This Site Can’t Be Reached
  3. Windows Has Stopped This Device Because It Has Reported Problems. (Code 43)


An “ERR_CONNECTION_CLOSED” error message in Chrome means that the browser is unable to provide the data needed to establish a connection to the website. This indicates that your Internet service has been disrupted.

It’s also conceivable that the internet service provider has prohibited access to a specific website. It’s also possible that there’s anything wrong with your internet connection. There could be a number of causes for this.

An Error Message Indicating That A Connection To The Remote Computer Has Been Closed

It’s tough to determine the exact source of an error when the only thing displayed on the page that causes it is the error name. For this reason, it is impossible to come up with a single blatantly clear and foolproof solution.

There are, however, a number of solutions that have proven successful in the past for a wide variety of users around the world. The following are a few of the most regularly used and dependable techniques. Decide which method works best for you by carefully following the instructions.

1. Restart the Router 

In order to resolve the “ERR_CONNECTION_CLOSED” error, you need begin with this simple setting change in your browser. It’s as simple as going to your Network and Internet settings and making the necessary adjustments.

The network you’re currently connected to, as well as its current state, may be seen here. That signifies your network connection is up and running properly if you can see the “Internet Access” indication.

Next, make sure that all of the cords leading to your device are correctly connected. Pressing the Restart button or disconnecting your router for a few seconds will also restart your router.

2. Restart Your Network

Connectivity troubles may be to blame for an error message stating “ERR_CONNECTION_CLOSED”. The problem may be resolved by resetting the network configurations to their default values. As an administrator, command prompt must be launched to begin this procedure.

Step 1: Open the Start menu and look for “cmd” there. You will find the cmd application among the results of your search.

Step 2: Right-click on this item to bring up a menu of further choices. Select “Run as administrator” from the drop-down menu that appears.

Step 3: Reset the TCP/IP configurations are the final step. A simple Netshell command is all that’s required to accomplish this. netsh int ip rebind

Windows Sockets, an interface that all connections to the internet protocol use, must be reset in order to complete Step 4. Winsock catalogue entries are also made by this programme….

The command prompt can be used to run the Netshell command. set winsock reset by use of the command line Once you’ve done this, restart your computer and continue browsing the web.

3. Disable the Proxy Server and VPN Connections

Anonymity on the internet is made possible by proxy servers and virtual private networks (VPNs). As a result, they’ve become a popular choice for many people around the world.

However, this necessitates a significant amount of data transport, which can lead to unexpected issues. Deactivating one of them may help if this error occurs while using it.

Step 1: Do not use a VPN for a time if you’ve been using one. Go to the “Internet settings” in the control panel and deactivate the proxy server if you use one.

Step 2: You’ll find the “Connections” section there. Here, look for the list of VPNs that have been set up. By clicking on the “Remove” button, if a VPN connection is present, it can be removed.

Step 3: Go to “LAN settings” and change the proxy settings. Make a note of the “Use proxy server for LAN” option and uncheck it. This will turn it off.

4. Clear The DNS Cache

An important element of DNS server name resolution is converting domain addresses to their numerical equivalents.

Every time a user visits a specific website, the DNS server and browser build up a cache of the domain name system (DNS). The “ERR_CONNECTION_CLOSED” error can appear if any of these components become out-of-date or incompatible.

DNS flushing is the only way to get rid of it. This will remove the cache completely. Ipconfig/flushdns is the command to use.

“chrome:/net-internals/#dns” can be used in the address bar to clean the browser’s DNS cache. Opens the “Net Internals” option that was previously concealed. Select “Clear host cache” from the drop-down menu.

5. Manually Obtaining or Changing DNS Servers 

If the server is down or misbehaving, it can cause problems with the connection. The “ERR CONNECTION CLOSED” error may be eliminated by switching to another server. Take the instructions outlined in the following section.

Step 1: Enter “ncpa.cpl” into the Network and Sharing Center or press Windows + R. Using this panel, you’ll be taken to the network map.

Step 2: Select “Properties” from the context menu of the connection that is now providing you with internet access. The configuration settings tab can be found by searching for and opening the “Internet Protocol Version 4 (TCP/IPv4).”

Step 3: Look for the “Use following DNS server addresses” option. You may now select your server addresses by clicking on it.

If necessary, deactivate your firewall and anti-virus programmes. Errors such as “ERR CONNECTION CLOSED” can be caused by firewalls, anti-virus software, and real-time scanners, among other things. Despite the fact that firewalls are critical for network and system security, faulty setups and other issues can compromise their effectiveness.

Ensure that these software applications are current. The firewall or anti-virus software can be disabled temporarily if it is necessary. Make sure to turn them back on after you’re done.

 6. Use The Chrome Cleanup Tool To Check For Malware

Even if you have the best anti-malware software in the world, it’s impossible to keep your computer completely free of malware. This means that there is always the risk that a malicious programme has entered your system and is interfering with its normal operation.

Because of this, it’s a good bet that the error was caused by this. Go to Chrome’s browser settings and look for a solution to this problem that is already in place and supplied by the browser itself.

Step 1: The first step is to go to the “Settings” tab by clicking on it. Afterwards, tap “Sophisticated” to get more advanced choices. Click the “Clean up Computer” button in the “Reset and clean up” option.

Step 2: Gather all of the equipment you’ll need to do the cleanup. Search” is the option. Chrome will alert you if the malware-detection programme it uses detects any threats. Then, you need to get rid of it as soon as possible.

7. Deactivating and Deleting Unwanted Extensions 

Add-ons for Chrome can be discovered at the Chrome store if you’re looking for something specific. These extensions may come in handy at various points throughout the game.

They are the building blocks of the Google browser’s improved performance. “ERR_CONNECTION_CLOSED” errors can occur no matter how frequently they are used, despite their relevance. When the extensions are no longer compatible or out of date, this is the most common cause.

Temporarily deactivate any extensions that may be interfering with your browser’s ability to connect to the Internet. To do this, type the URL below into the address bar of your browser.


If the page you were trying to visit opens quickly after disabling the extensions, you’ll know that they were the cause of the difficulty. Then you can start disabling the extensions one by one until you figure out which of them is causing the issue. After spotting the extension, simply click on the “delete” button to get rid of it.

8. Update Chrome

In order to ensure that your browser has been updated, simply type the following URL into your browser’s address bar: chrome:/settings/help

Chrome runs a check to discover if the current version of the browser is available. In this case, there are two conceivable outcomes. There will be a notice that reads “Google Chrome is up to date” in the first instance. If you don’t, it will start updating on its own. You won’t have to worry about being disconnected again.

9. Reinstalling Chrome 

If none of the other approaches work, this is your last resort. You’ll need to remove and reinstall the Chrome browser. All of your preferences will be reset to their default values.

Step 1: Open the Control Panel first. This is where you may remove Chrome from your system.

Step 2: Select “Uninstall an application” or “Programs and Features” from the drop-down menu. You’ll now get a list of all the programmes that are currently installed on your computer.

Step 3: Look for “Google Chrome” in the list of programmes installed on your computer. It’s likely that the list will be arranged alphabetically, so you’ll be able to find Chrome quickly. To uninstall Google Chrome, pick “Uninstall option” from the “Google Chrome” menu. You’ll see an Uninstall button at the top of the programme list when you open it.

Step 4: To complete this step, look for and select the “Also delete your browsing data” checkbox. This solution requires you to erase all of your data before reinstalling Chrome. It’s time to reinstall Chrome on your computer after the deletion is complete. To do this, start a new browser and type in “chrome” in the address bar.

Step 5: Hover over the “Download” option that appears north of the page when you reach it. Then select “For Personal Computer” from the drop-down menu. You’ll be taken to a page where you can download the Chrome browser.

Step 6: Click “Download Chrome” to begin the download process. Your Windows version will now be downloaded. Click “Accept and Install” to begin downloading. In the end, your Windows will ask you to “Run.” So that Google can send your computer the necessary installation files, let it run.

Read Also:

  1. Ntoskrnl.exe
  2. There Was a Problem Resetting Your PC
  3. Ethernet Doesn’t Have a Valid IP Configuration


Here’s hoping that the techniques outlined above will enable you to fix the “ERR_CONNECTION_CLOSED” error and ensure that Chrome runs smoothly on your PC. Ensure that you adhere to the guidelines and examine which of the options you may use to resolve the issue at hand.