How To Fix ‘Windows Can’t Communicate With the Device or Resource’ Error

Error
Error

After you turn on the computer, you may encounter an error message that prevents you from accessing the Internet. You can use the Windows Network Diagnostics tool to troubleshoot the software and eliminate this problem.

A message will pop up saying that Windows cannot communicate with the device or resource, especially the DNS server, when troubleshooting is complete.

Your daily routine will be disrupted by the Windows can’t communicate with the device or resource issue. A fix for the “Windows cannot communicate with this device or resource” problem must be found.

So, in order to resolve the Windows can’t communicate with the device or resource error, you’ll need the following. Multiple solutions for the Windows can’t communicate with the device or resource error will be mentioned below so that you can locate the solution from one of the listed solutions.

Error

The primary role of the DNS is to translate a computer’s hostname into an Internet Protocol (IP) address. If a machine wishes to communicate with an example.net webserver, for example, it will need the IP address of example.net.

You may get the Windows cannot interact with device or resource problem if your computer cannot connect to your ISP’s primary DNS server. When you are unable to connect to the internet, the Network Diagnostics programme displays this problem message.

There are four ways to fix the Windows can’t communicate with the device or resource error that we’ve outlined in this article for the benefit of our readers.

As a result, we’ve thought of every scenario in which Windows might be unable to interact with the device or experience a resource problem, so if you’re still having trouble, please be patient and try each of the other three alternatives one at a time.

Read Also:

  1. System Service Exception
  2. Microsoft Compatibility Telemetry
  3. Reboot and Select Proper Boot Device

How Do I Fix Windows Is Unable To Communicate With The Device?

All Windows 10, 7, 8, and 8.1 users will be able to use the solutions described below.

 1. Automatically Obtain DNS Server and IP Addresses

In order to get the DNS server and IP address, take the following procedures.

Step 1: Open the Control Panel in order to begin the installation procedure. You’ll be presented with a wide range of options in this step. You must select Large Icons from all of the available choices. From the list, you’ll see and select the Network and Sharing Center from there.

Step 2: From there, you can explore the rest of the items on the list. Change Adapter Settings option. You’ll then have to choose the network that you’re connected to. Right-clicking on the network will allow you to do this. Once you’ve chosen the network, you’ll see a drop-down menu.

Step 3: Select “Properties” from the drop-down menu. Choose Internet Protocol Version 4 (TCP/IPv4) from the Properties list.  Click on Properties after selecting TCP/IP Version 4 (TCP/IPv4). In order to complete Step, you must select the option that states Automatically obtain IP address.

Step 4: Next, select the option that says Automatically obtain DNS server address. Select the option OK to proceed with the procedure. Then, click on the Save options to save the changes you’ve made. Go back to the Properties option and select it. In the Properties list, select Internet Protocol Version 4 (TCP/IPv6) from the drop-down list.

Step 5: Click Properties after selecting Internet Protocol Version 4 (TCP/IPv6). Next, select the option that says “Obtain IP Address automatically” in Step 17 of the installation process. Next, select the option that says “Obtain DNS Server Address Automatically” to proceed. Click OK to proceed with the process.

Following a reboot, check to see if the Windows can’t communicate with the device or resource issue continues. As long as the Windows can’t communicate with the device or resource problem continues to disrupt your work, you’ll need to find a different solution.

Solution 2: Using Google’s Public DNS 

To switch to Google’s public DNS, follow these instructions.

Step 1: Open the Control Panel in order to begin the installation procedure. You’ll be presented with a wide range of options in this step. You must select Large Icons from all of the available choices. From the list, you’ll see and select the Network and Sharing Center from there.

Step 2: From there, you can explore the rest of the items on the list. Change Adapter Settings option. You’ll then have to choose the network that you’re connected to. Right-clicking on the network will allow you to do this. Once you’ve chosen the network, you’ll see a drop-down menu.

Step 3: Select “Properties” from the drop-down menu. Choose Internet Protocol Version 4 (TCP/IPv4) from the Properties list. Next, click on Properties after you’ve selected Internet Protocol 4 (TCP/IPv4). Afterwards, you’ll need to select the option that states “” Please make use of the DNS server listed below.

The preferred DNS server is 8.8.8.8. You will need to provide this information in the Preferred DNS Server section.

Step 3: Select the option OK to proceed with the procedure. Then click on the Save choices to save the changes you’ve made.

 3. Delete Temporary DNS files

Clearing the DNS cache can be accomplished by performing the steps listed below.

Step 1: Type Command Prompt into the search box to begin the procedure.

Step 2: Right-click on the Command Prompt option and select Run as administrator. Make sure the option that says “Run as Administrator” is selected. Type ipconfig /flushdns in the Command Prompt option. Then press the Enter key on the keyboard to resume the operation.

It’s time to reboot your machine.

4. Changing the Hosts File 

In order to change the host’s file, follow these instructions.

Step 1: Open C: WindowsSystem32driversetc. to get things started. You’ll be presented with a wide range of options in this step. You must select the hosts file choice from the various possibilities that are available to you. Open with Notepad is an option you’ll see in the list of options.

After that, in order to proceed, you must erase everything inside of the folder.

Step 2: Finally, press Ctrl + S at the same time. For safety, this is done.

It’s time to reboot your machine.

Read Also:

  1. Dev Error 6068
  2. Netflix Code NW-2-5
  3. DPC Watchdog Violation

Conclusion

Fixing the Windows can’t communicate with device or resource error should be straightforward using the methods listed above. In addition, the user must be familiar with network drivers. There is a possibility that the network drivers that you are now using are not up to par.

It is recommended that you update the network driver to fix this. Once the network driver is updated, there are two ways it can be done: either manually or automatically.

This issue occurs when Windows cannot interface with a device or resource. We are confident in our solutions. We sincerely hope that the information contained herein is useful to the people who will be reading it.