Windows Resource Protection Could Not Perform The Requested Operation

Windows Resource Protection Could Not Perform The Requested Operation

Many people have suggested running the SFC Scannow Command utility whenever Windows has failed, crashed, or frozen. A scan of your Windows system files for damage, corruption, or irregularities is performed by this useful utility, which is also known as the system file checker.

If the SFC detects any such problems, it will apply appropriate fixes to the affected files and eliminate the resulting issue.

If the SFC is malfunctioning, you may see an error message reading “Windows Resource Protection Could Not Perform The Requested Operation” when attempting to run it. Let’s discuss the root causes and potential solutions to this problem.

Windows Resource Protection Could Not Perform The Requested Operation

In What Way does “Windows Resource Protection Could Not Perform The Requested Operation” Occur?

The “Windows Resource Protection Could Not Perform The Requested Operation” SFC error may be brought on by a number different problems, but Microsoft hasn’t officially disclosed which ones.

  1. It seems that the SFC scan is being hindered or interfered with in some way, as it was unable to finish the check.
  2. Windows server problem has occurred.
  3. Unfortunately, the SFC Scannow Command utility is broken.

Your SFC utility tool may be flawed, or there may be a problem with the disc, but either way, we were unable to complete the requested action (the scan). A “Windows Resource Protection Could Not Perform The Requested Operation” SFC issue might have a variety of causes, but there are a few ways to resolve it.

The SFC Scannow Error “Windows Resource Protection Could Not Perform The Requested Operation”: 5 Possible Resolutions.

There are a few things you may attempt if you’ve tried using the SFC scannow command tool multiple times but still getting the aforementioned error and subsequent scan failure.

Method 1. In Order to Check for Hard Drive Error

First, do a CHKDSK scan to see if your hard drive is in good working order. This is important because the “Windows Resource Protection Could Not Perform The Requested Operation” SFC error message may be caused by damaged or corrupted system files on your drive. Following these steps will allow you to initiate a CHKDSK in Windows 10.

Step 1. Type “Command Prompt” into the computer’s search box.

Step 2. To launch Command Prompt with administrative privileges, right-click on the programme and select the appropriate menu option.

Step 3. To run a full disc check on drive C:/r, type “chkdsk C: /r” at the command prompt.

Step 4. Remember to change “C” to the letter of the drive where Windows is installed on your computer. If chkdsk finds and repairs any problems, then your SFC scan should function normally. Please verify by retrying, or proceed to the next option.

Step 5. To proceed, press the Enter key.

Step 6. If you wish chkdsk to run automatically after a restart, press Y to confirm.

The chkdsk scan cannot begin until the computer is restarted.

Method 2. Enter Safe Mode and Perform an SFC Scannow

If you’ve already tried running chkdsk and fixing any errors it found, but you’re still getting the “Windows Resource Protection Could Not Perform The Requested Operation” SFC error message, you can try running the scan in Safe Mode.

Step 1. Type msconfig into the computer’s search box. In order to launch the system settings window, press the enter key.

Step 2. To access it, select the boot tab that sits above the main tab.

Step 3. The boot settings menu should have a “safe boot” option that should be checked.

Step 4. Make sure the box labelled “minimum” is checked, and then click Okay and Apply.

Step 5. The computer needs to be restarted now.

Try the SFC scan once more, but this time from safe mode. Find the Command Prompt application, then right-click it and select “Run this programme as an administrator.” To begin scanning, press SFC /scannow [enter]. If this does not resolve the problem, try the next option.

Method 3. WinSXS Folder Security Descriptors should be Updated.

The WinSXS folder contains many of your Windows system’s updates and system files, and if your SFC utility tool is unable to reach this folder, it will fail and display the error message. The folder’s security descriptors can be changed to work around this.

Type “Command Prompt” into the computer’s search box.

Step 1. To launch Command Prompt with administrative privileges, right-click on the programme and select the appropriate menu option.

Step 2. Type ICACLS C:Windowswinsxs [enter] into the Command Prompt to begin installing ICA Client Access Control Lists.

Step 3. Your computer needs to be restarted for the new label to take effect.

Step 4. Please re-scan using SFC now.

Method 4. Setup Windows Module Installer

SFC Scan is not likely to function if you have turned off the Windows Module Installer on your PC. This programme will automatically check for and apply any new versions of Windows to your machine.

Because of malfunctions caused by faults in your system, the SFC scan may fail if you disable it. The correct action is as follows.

Step 1. To bring up the Run dialogue box, press the Windows key plus R on your keyboard.

Step 2. In the run box, enter services.msc and click okay.

Step 3. The Windows Module Installer can be accessed via a right-click on the relevant entry in the list.

Step 4. Make a selection and run it from the menu.

Now, try to run the SFC Scannow Command tool and see if you get the same “Windows Resource Protection Could Not Perform The Requested Operation” SFC problem.

Method 5. Start the Recovery Procedures.

If the error persists even after updating to the most recent version of Windows, you can enter recovery mode and use the command prompt to run the System File Checker software in an effort to fix the problem. Learn the steps, here.

Step 1. Using the computer’s power settings, you should restart it if it is currently running.

Step 2. It is possible to enter recovery mode by pressing F11 at the start of the computer’s boot process or by employing a bootable USB drive.

Step 3. When in recovery mode, select the Command Prompt from the menu of available tools, and then press the run button.

Step 4. Start Command Prompt and then enter sfc/SCANNOW /OFFBOOTDIR=c: /OFFWINDIR=c: into it.

[Return] windows [Enter].

After the preceding command has been correctly entered and carried out, recovery mode will be left behind and Windows will be booted normally. Next, look for Command Prompt to launch it as an administrator and perform the SFC scan to see if the problem still exists.

Final Words

If the problem persists after attempting the automated repair and doing the other troubleshooting steps outlined above, a clean installation of Windows is your final resort.

While this is annoying, it will get you back up and running without the glitch. Please let us know in the comments if you have any further questions about the techniques we’ve covered in this article.