10.0.0.138 is a private IP (Internet Protocol) address and the default login IP (Internet Protocol) that is reserved for modems and wireless routers.
This address can be assigned to any device in the local area. The programming is very directional that allows only such devices to get connected to the network system.
There are a vast variety of such devices like modems, routers, or IoT (Internet of Things) devices that use such addresses.
Also, there are various brands like D-Link, Huawei, Siemens, 2-wire, and NetComm which often use this address.
Generally, we don’t use this address but sometimes we need to use it like when initiating the setup process by the technician.
The range of such IP (Internet Protocol) addresses lies between 10.0.0.0 to 10.0.0.255.Here we are listing some of the important features of the 10.0.0.138 IP (Internet Protocol) address:
- 10.0.0.138 IP (Internet Protocol) address empowers the user with hardcore privacy and hence avoids the leak of data to the third-party systems.
- With the help of default gateways, we can send the data to various destinations according to their needs.
- 10.0.0.138 gives WPA / WPA 2 encryptions which act as a barrier to the data leakage of the Wi-Fi community.
Now let us describe few terminologies before entering into the article.
A router is a physical appliance that aids the transfer of information between computer networks.
This streamlines the flow of information and data from point of origin to the point of destination. Hence, we can say that it acts as the gateway or the point of meeting of 2 networks.
These routers (wired and wireless) help computers and network devices for internet access. Linksys, 3com, D-Link are the most common routers that we can take as an example.
IP stands for internet protocol which is the digital media transport system that runs over standard IP networks.
Every IP address acts as an identifier for a computer which leads to avoidance of duplication of the computer network.
Where is the Login Page for 10.0.0.138?
Open your browser and then type- http://10.0.0.138. You will be immediately jumping into the login page for the admin panel in windows.
Sometimes you may forget your password or the mismatch of login credentials so in this case, what you have to do is just reset the modem to factory settings.
Resetting the Password for 10.0.0.138?
Click on the reset button which is situated on the rear end or the bottom area of the modem. This will lead to resetting of the modem.
20 seconds of holding down of this mini button will result in the restoration of the factory settings.
One thing that has to be noted is that resetting the modem will lead to loss of online connection and this will create a problem.
Hence it is always wise to take the opinion of the expert in such cases. Lack of information may aggravate your problem.
Troubleshooting 10.0.0.138
These are the methods that turn out to be helpful for the troubleshooting of an issue:
1. Resetting the Defaults
There are many instances where login credentials do not match or probably slipping out of password from the memory. So, restoring the default settings may be one option to save you from trouble.
Even there is an issue with the small size of the reset button that may cause accidental resets. Here are the steps that you need to follow-
Step 1: Try to navigate to the reset button.
Step 2: You have to long-press the reset button for nearly 20-30 seconds with an agency of sharp needle or toothpick. This will result in the resetting of the router on its own.
Step 3: Now finally restart the whole process again.
Read Also:
2. If You Can’t Access Router’s Admin Page
In an ideal situation, access to the 10.0.0.138 admin page is not very problematic and is a simple task.
But problems arise in the form of technical glitches so what you need to do very first thing is to check the router connection.
You have to take care of cable assembly whether it is neat and connected securely. Do the proper inspection of all the cables, mainly the Ethernet cable.
Switch off the router followed by switching on and then enter the correct URL (Universal Resource Locator).
Note that URL (Universal Resource Locator) has to be typed properly, sometimes there is a possible mistake and you may have typed 10 .0 .138 or 10 .0 .0 .0 .138.
Now finally check the strength of the signal. If the still problem persists and the issue is not solved then the only thing you can do is to call customer service.
3. If You Cannot Find Your Router’s IP (Internet Protocol) Address
If this is the problem you are having that don’t worry here are simple steps that are to be followed
For windows users here are the steps:
Step 1: Navigate to the start menu.
Step 2: Now in the search bar type the text- “cmd”. This will give you access to the command prompt.
Step 3: Now in the interface you have to type Ipconfig. Press enter.
Immediately your network details will be displayed.
For Mac users here are the steps:
Step 1: Navigate to the search bar or click the command and spacebar simultaneously.
Step 2: Now Write terminal and this will jump your cursor into the terminal screen
Step 3: Now do the same thing. Type Ipconfig. Press enter.
It will display your network details.
Troubleshooting Router Problems
Sometimes you are not able to log in to your router due to a mismatch of username or password. Forgot Login Password? Now here what you need is the hard resetting.
So, there is a small button which is black in color. What you have to do is long-press it for about 10 seconds. Your router will be reset to the factory settings.
Router login page not loading? Sometimes there is a problem with the loading of the login page.
So you are required to make sure that the device which you are using is properly and perfectly connected to the wi-fi.
Also, sometimes there are cases where the wrong router IP address has been set as the default one. Sometimes pages may have issues loading or problems with speed.
In this case, your network is probably using a different IP (Internet Protocol) address. If this occurs, consult our IP (Internet Protocol) address router list, and locate the right address.
If you need any help, check out our tutorial on how to find your router’s IP (Internal Protocol) address.
Sometimes users face problems with the connection of Internet or Wi-Fi? So, irrespective of the type of problem many of them can be easily fixed by router troubleshooting.
1. Reboot the Router
You must have tried rebooting several times. Many network problems can be resolved by this wonderful feature of a low reboot.
There is a large number of problems related to loading speed, network issues, router rebooting, wireless is flaking out that it can easily resolve.
Maximum routers are very easy to use where you just have to unplug your power cable, waiting for few seconds, and then again plugging it.
In the case of a separate modem, you can unplug the power cable and then plug it back in after waiting for a few seconds. Some devices may also have a power switch for this purpose.
This unplug-and-plug-back-in is a universal method that is applicable for all routers. Here you need to note one thing very carefully that if there is a need for frequent rebooting then.
There is a probable chance that manufacturers’ firmware is likely to be unstable or filled with bugs. You can also install other firmware like DD-WRT for getting things done.
2. Check for Overheating
Routers also suffer from the problems of over-heating. This damages the internal parts of the router and makes it susceptible to network stability and other technical issues.
So, what you need to do first is to check the temperature of the router and maintain the proper flow of air for the optimum temperature range.
3. Verify Cables Are Securely Connected
It is the human tendency to jump to complicated solutions before trying new ones.
For example, you must have pulled on or kicked a cable by mistake and this results in unplugging or losing it. Ensure the clean and secured connection of your cables.
There are a large number of cables between router and modem, between modem and wall socket, and ethernet cables on the backside of the router. Now you have to see if the ends of the cable are well connected so that they don’t get loose.
4. Reposition the Router
Are you trying to reposition the router due to signal issues? If this also does not solve the issue then ensure that possible signal blocking factors.
If not present in the vicinity of it like large metal objects or devices, microwaves, and cordless phones.
Sometimes the router’s antenna is positioned horizontally. So, change the assembly and put it vertical that gives the largest area of coverage.
5. Other Possible Problems
Things don’t end up here and there may be other problems like a broken router, modem, and ethernet cable. The problem of software lies in the fact that there is a connectivity issue with only one device.
So, the troubleshooting process and rebooting may help to a great extent for the specific device. If your router needs frequent resets due to instability issues then better replace it as they are very affordable nowadays.
Read Also:
Conclusion
10.0.0.138 is a private class A IP (Internet Protocol) address. So, there is no connection available which is outside the private coverage.
Now the user is most interested in privacy, smoothness, and low disturbance in their connection. So, it is very important to gain access to the admin’s settings that boost privacy.
Here are examples of some fixing of problems by the restart.
Slow windows: Sometimes your windows are hanging and running very slowly which drains the CPU (Central Processing Unit) and other computer resources.
It is necessary to end this problem as it all misbehaves with the program. A significant chunk of people has got their problem resolved by just rebooting the entire system.
Memory over usage by Firefox or another relevant program: This was the past issue with Firefox and reported a large number of memory leaks.
With time things aggravated and messed up when this browser started to consume more and more memory and became ultra-slow over the period of time.
Now what we observe here is just by closing Firefox does not solve the problem but is applicable to any software with memory leaks.
Problems of the Internet or Wi-Fi Network Problems: There is a certain problem with your Wi-Fi or Internet connection. So, in this case, just resetting the router is a general solution for all the connection problems.