if you’ve ever used a computer running Windows 10 or Windows 11, you’ve probably encountered the most prevalent internet problem: the “No Internet Secured” notice.
Fortunately, there are as many solutions to the problem as there are reasons for it. For Windows 11 and 10, here are solutions to the “No Internet Secured” issue.
Method 1. Connect More Closely to Your Network’s Router
As was previously indicated, being too far away from your internet connection’s origin is the most prevalent cause of the “No Internet Secured” status. This allows your computer to “connect” to the Wi-Fi network, but the signal strength is too low for any data to be transferred.
Either bring your computer or router physically closer to the internet source. The internet router in your house should be placed in a central area, high above the ground, far from any obstacles that could weaken the signal.
If your house is too large for a single internet router to provide an adequate signal throughout, you may want to look into purchasing a Wi-Fi extender or perhaps a mesh network. Each of these solutions will aid in extending your home’s Wi-Fi network’s range.
Method 2. Power down your network and computer and power them back up.
Your router’s connection to your ISP and your devices will be reset when you restart it. The most common internet issues can be resolved by just restarting your device.
A router’s restart process doesn’t require any special skills. Simply wait ten seconds after unplugging the power cord before reconnecting it, and give the router some time to boot up. When it’s done loading, you can attempt reconnecting to the network.
As an additional precaution, you may wish to restart your computer. A surprising number of problems can be resolved by doing this as well.
Method 3. Get Rid of Your Virtual Private Network
VPNs are fantastic for hiding your online activity from prying eyes, but they sometimes interfere with your connection speed. Using a virtual private network (VPN) is likely to cause your internet speed to decrease, which may result in a “No Internet Secured” message.
Disabling a virtual private network could fix internet connection drops that occur when using one. Having the connection start working out of the blue indicates a problem with the VPN being used. You could either alter its settings or switch to an other virtual private network app.
Method 4. Try Windows’ Built-in Tools for Fixing Network Issues
Both Windows 10 and Windows 11 are extremely intricate platforms. Even the most basic computer is running dozens of programmes, some of which were created more than two decades ago. Because of this, encountering a bug or problem is practically guaranteed.
Microsoft is aware of this, which is why it has included a set of automated diagnostic and repair features in both Windows 10 and Windows 10 S. The prevalence of internet-related problems has led Microsoft to provide not one but two troubleshooters specifically designed to address these difficulties.
These programmes will run through a standard set of problems and attempt to fix any problems they find.
Learn where to look for Windows’ two internet diagnostic tools:
Step 1. launch the PC’s Settings programme.
Step 2. Click the Update and Security option in Windows 10. With Windows 11, go to Settings > System.
Step 3. Select Troubleshoot from the drop-down menu, then either Extra troubleshooters (10) or Other troubleshooters (11).
Step 4. Use both of the online troubleshooters on this page to see if that fixes your internet connection issues. In technical terms, these components are known as a Network Adapter or an Internet Connection.
The problem should be quickly identified by these instruments and resolved immediately. If it reports no problems or indicates it has located a problem but cannot resolve it, you should keep reading.
Method 5. Put Your Online Account in “Forget” Mode.
Once your computer establishes a connection to a Wi-Fi signal, it stores and recalls a great deal of data about that signal. This facilitates future use by your computer, but it may also prove to be a stumbling block. The “No Internet Secured” problem may appear if the Wi-Fi network’s name or signal type has changed without Windows being updated to reflect the change.
Fix this by deleting Windows’ saved data and reestablishing your connection to the wireless network. This will update any outdated information stored on your computer.
This is what it means to “forget” a Wi-Fi network:
Step 1. launch the PC’s Settings programme and navigate to the Network & Internet section.
Step 2. Select Wi-Fi, and then click Manage.
Step 3. Choose the wireless network you wish to delete and then click the Forget button.
If you’ve already forgotten which network you were using, just reconnect.